Archives for September 2026

4th Meeting on Innovation in Food Packaging in the Basque Country

GAIKER will take part in the 4th Meeting on Innovation in Food Packaging in the Basque Country, organised by ontzi | BASQUE FOOD PACKAGING Innovation Hub. The event, which will take place on 24 September at the Ilgner Building in Barakaldo (Bizkaia), is intended to serve as a hub for networking opportunities for food companies, solution providers, experts and other players in the packaging value chain, with the aim of tackling the challenges posed by the new regulatory and competitive landscape for packaging in Europe.

During the event, GAIKER will have a stand, where it will showcase its expertise and technological capabilities in the fields of packaging, materials, polymers, recycling and the circular economy. It will present some of the latest technological developments in these fields, including the recovery of agri-food waste and by-products to produce biopolymers of bacterial origin, the formulation and compounding of biopolymers and bioplastics with improved properties for packaging, and the use of recycled plastics such as rPET and recycled polypropylene from a closed-loop system to produce packaging for fifth range products (pre-prepared, cooked, vacuum-packed and ready-to-eat after reheating). It will also demonstrate prototypes or preliminary materials from representative projects such as the European E-OILé, Elkartek BIWIN2 and the CIRCULAR PACK projects.

This event is an opportunity to share knowledge and bring together the expertise of the various players in the sector.

Please feel free to come and visit our stand

E-OilÉ revolutionises small-sized packaging

One year after its launch, the European E-OilÉ project is making good progress, achieving significant scientific milestones and attracting an ever-growing community, thereby consolidating its path towards developing small-format, single-use biodegradable packaging for food and cosmetics.

The GAIKER Technology Centre, a member of the Basque Research & Technology Alliance (BRTA), is coordinating the E-OilÉ project, the aim of which is to develop a sustainable alternative to the billions of small bags and containers made from fossil fuels that are used every year and may end up in the environment. To this end, work is underway to develop biodegradable packaging that is safe and can be scaled up to industrial levels, making it possible to move towards more sustainable consumption models without compromising the quality and functionality of the products.

One year on from its launch, the project is making good progress, with significant scientific advances and promising results.

Against this backdrop, the 15 partners that make up the consortium met in Novara (Italy) to share the key progress and results achieved during the project’s first year and to set out the next steps. This meeting was a further step towards developing safe, sustainable, single-use packaging, that is biodegradable and recyclable

One of the key developments was the definition of the ‘Safe and Sustainable by Design’ (SSbD) criteria. ITENE defined and documented the preliminary ‘Safe and Sustainable by Design’ (SSbD) criteria for the four use cases, providing the consortium with a common, thorough, evidence-based framework for assessing the materials developed within the project.

On this basis, the first batches of the new biopolyester-based biodegradable biomaterials (from Novamont), enriched with olive oil by-products (MYROLION) and polysaccharide-based compounds (from OIMO), have undergone extensive testing at GAIKER, been digitally replicated, and market solutions are now being explored.

At the same time, OIMO and Novamont have developed the first plant-based bioplastic films, and these have been sent to the Danish Technological Institute to assess their biodegradability. The initial results point to the potential of these materials.

Indeed, the results of these trials are helping to feed into the artificial intelligence model developed by the NORCE research centre. This tool will act as a digital twin capable of modelling and predicting the behaviour of new materials developed as part of the project and those that may be developed in the future as they biodegrade.

Technological progress has also been coupled with a strategy geared towards the future exploitation of the results. In this regard, PNO Innovation has identified the first results with exploitation potential and has defined possible avenues for commercialising the packaging solutions developed by the E-OILÉ project, thereby paving the way for their future market application.

About E-OilÉ

E-OilÉ (sustainable end-of-life routes for single-use monodose packaging for oily products) is a four-year European project, funded by the Horizon Europe programme (Grant Agreement No. 101177771), which brings together 15 partners from 10 countries with the aim of developing biodegradable, safe, recyclable single-use packaging solutions for applications in the food and cosmetics sectors. The project will focus on four real-world use cases: olive oil, oil-based sauces, body oil and facial serum, with the aim of achieving a technology readiness level (TRL) of 7.

“Biodegradable by Design, Sustainable by Nature”

The network is growing

The E-OilÉ community continues to grow and become more established. The project invites all individuals and organisations interested in innovation and sustainability in packaging to follow its activities, subscribe to its newsletter and join its stakeholder network.

“A year ago, this was nothing more than a plan on paper and a group of people who believed in it. Today, it is about science, data, a community and a project that is making real progress. "I couldn’t be more proud of what this consortium has built together over the past twelve months,” said María José Suárez (GAIKER), the project coordinator.

This project has received funding from the European Union's Horizon Europe research and innovation programme under grant agreement No. 101177771.

Funded by the European Union. However, the opinions and views expressed are solely those of the authors and do not necessarily reflect those of the European Union or the European Health and Digital Executive Agency (HaDEA). Neither the European Union nor the granting authority are responsible for them.

16th Conference on “Innovation in Plastic Materials and Technologies”

GAIKER is holding this conference aimed at plastic processing companies once again this year.

ALLOD Werkstoff (specialists in R&D in thermoplastic rubbers -TPR) and the GAIKER technology centre invite companies from the plastic processing sector to another conference on "Innovation in Plastic Materials and Technologies". This year’s event will take place on November 10 in the Edificio Barco at the Bizkaia Science and Technology Park (Zamudio).

The latest national and international trends in the plastics sector will be presented, along with the most innovative developments and advances in the fields of raw materials, processing and machinery for the plastic processing sector.

This conference is a key event for companies and suppliers in the sector, allowing them to get to know each other and build relationships with each other. Details on how to register will be provided shortly.

GAIKER to take part in REGENIOUS to move towards a cleaner regeneration process for activated carbon

The European project will develop innovative electrochemical regeneration technology that will make it possible to replace conventional fossil-fuel-based processes and promote a more sustainable, circular approach to water treatment.

A kick-off meeting was held in Madrid in July for the European REGENIOUS project (REthinking the REGENeration of spent granular activated carbon), which was launched the month before. The project, in which the GAIKER Technology Centre, a member of the Basque Research & Technology Alliance (BRTA), is involved, aims to revolutionise the regeneration of spent granular activated carbon, a key material in industrial and municipal water treatment, by developing an innovative electrochemical regeneration technology to replace conventional thermal regeneration based on fossil fuels.

Over the next 48 months, REGENIOUS will develop the first portable, modular electrochemical regeneration plant of its kind, designed to operate directly on the end-user’s premises and make it possible to regenerate spent activated carbon on site. The technology will be demonstrated at drinking water treatment plants in Spain and wastewater treatment plants in Cyprus, with the aim of validating its performance under real-world operating conditions. Replication activities will also be carried out in Germany and Portugal to encourage their wider implementation across Europe.

The project is being coordinated by ENVIROHEMP and brings together a multidisciplinary consortium of 16 European organisations, including companies from the water sector, research centres, universities, technology providers, standardisation bodies and innovation organisations. The consortium is made up of Consorcio de Aguas Bilbao Bizkaia, Eparchiakos Organismos Aftodioikisis Larnakas, Aigües de Barcelona, Canal de Isabel II, Extraco Construccions e Proxectos, ASCA, the Autonomous University of Barcelona, the GAIKER Foundation, the Central Metallurgical Research and Development Institute, CETAQUA, the Spanish Association for Standardisation (UNE), Contactica, C4G, Waterloop Solutions and Water Europe.
Beyond technological innovation, REGENIOUS is looking to increase the sustainability and competitiveness of the European water sector by promoting circular resource management and reducing the carbon footprint associated with regenerating activated carbon. The project will also explore new second life applications for spent activated carbon and develop new business models and tools for assessing sustainability to facilitate their future implementation in the market.

REGENIOUS is supporting the objectives of the European Green Deal, the Circular Economy Action Plan and the Processes4Planet Partnership by helping to reduce greenhouse gas emissions and develop more resource-efficient industrial processes, and drive progress towards making European industry more competitive and climate neutral.

GAIKER’s work
GAIKER specialises in developing innovative water treatment solutions from a circular economy perspective, designing the most appropriate strategy for every need.

As part of the REGENIOUS project, GAIKER is playing a key role in characterising, evaluating and validating the electrochemical regeneration of spent activated carbon (GAC/EAC), while also leading one of the work packages. Its main responsibilities include defining the requirements and strategies for regeneration, developing performance indicators for the REGENIOUS system, characterising and benchmarking spent activated carbon, assessing the risks associated with implementing the technology, and helping to validate both the solution developed and the operational support tools in real-world water treatment plants.

This project is funded by the European Union under Grant Agreement No. 101286562. However, the views and opinions expressed are those of the authors alone and do not necessarily reflect those of the European Union or the European Executive Agency for Health and Digital Technology (HaDEA). Neither the European Union nor the granting authority can be held responsible for them.